A tutorial on changing the oil in your 2014-2015 Chevy Cruze diesel.
Items you will need:
1. 5 Liters of Dexos 2 approved oil. We provide several options in our oil change kit. Dexos 2 is General Motor’s oil specification. More info here.
2. Oil Filter, Man. # 19301505. Also included in our oil change kit.
3. 13mm socket and socket wrench.
4. 32mm socket or oil filter wrench.
5. Some paper towels and gloves.
6 Ramps for car.
Procedure:
- Roll the car onto ramps.
- Get under the car at the oil pan. Towards the rear of the pan, you’ll see the drain plug. It requires a 13mm socket.
- Place an oil drain pan under the oil pan, unscrew the oil drain plug with the 13mm socket, and let the oil drain into the pan.
- Once the oil has finished draining, screw the drain plug back on and snug tightly.
- Now, grab your 32mm socket/oil filter wrench. The oil filter is located on the upper left side of the engine bay, right under the alternator.
- Unscrew the oil filter cap with the 32mm socket. Be careful–some oil will spill out as it unscrews.
- Remove the cap and gently snap off the old filter.
- Replace the o-ring on the inside of the filter cap with the new one from your filter box. It helps to use a small screwdriver or pick to pry it out.
- Snap your new filter in and then screw on the cap until it’s snug.
- Add four quarts of your selected oil. Take the car off the ramps and check where the oil level is on the dipstick. You’ll probably need to add a little more to get it up to the correct level. Total oil capacity is 4.75 quarts.
- Go back in your car and reset the oil monitor on your dash.
You’re done!