Reset Sprinter Service Reminder

Here’s how to reset the service indicator on your Sprinter Van after you’ve done a routine maintenance service (oil change, fuel filter change, etc.)

For vehicles without Steering Wheel Buttons:

  1. Switch on ignition without starting engine.
  2. Hold down the 0 button until you hear a beep (can take about 20-30 seconds).
  3. Press the button with an ‘M’ on it until the display reads   “rESEt .51 / rESEt .31”.
    On older models, it will read  “rESEt 229.5 / rESEt 229.3”.
  4. Press the 0 button for three seconds, release it, and press it one more time.

For vehicles WITH Steering Wheel Buttons:

  1. Switch on ignition without starting engine.
  2. Press the up arrow until the words “service scope in xxx” appears.
  3. Press the 0 button until you hear a beep (this can take about 20-30 seconds).
  4. Press the lower steering wheel button, “Menu Back”, once.
  5. Select “Service scope in XXX” using up and down arrow buttons.
  6. Press the 0 button, the “To Be Done” menu should appear. Note, on other models this may also be called “Carry Out”.
  7. Select “Compl Serv” using + and – buttons on right side of steering wheel. Confirm using the upward arrow.
  8. The oil types menu should appear. Select the oil type using the + and – items. Hit the upward arrow to confirm.
  9. Hold down the 0 button on the cluster for 3 seconds until the display reads “Service Confirmed”.

You’re done!

Leave a Reply

%d bloggers like this: